المواد المدرسة - الدراسات الأولية

1- مكائن ومعدات ثقيلة
2- معدات تهيئة التربة
3- تسوية وتعديل اراضي
4- ادارة مكائن والات زراعية
5- معدات جني وحصاد
6- معدات ما بعد الحصاد
7- معدات ومنظومات هيدروليكية
8- الرسم الهندسي
9- المكائن والالات الزراعية
10- مكائن الغابات
11- حلقات
12- مشاريع
13- مكننة المحاصيل الحقلية
14- تطبيقات في الحاسوب
15- مكننة الانتاج الحيواني
16- مكننة البساتين

المواد المدرسة - الدراسات العليا

1- معدات جني وحصاد متقدم
2- طرق بحث
3- حلقات

البحوث المنشورة

المؤتمرات

ت اسم البحث أو الكتاب الذي تم نشره في المؤتمر اسم المؤتمر / الندوة تاريخ المؤتمر/ الندوة البلد
1. Speed and feeding rate impact maize sheller productivity
5 th International Conference on Pure Sciences and Agricultural Sciences
2023
Antalya Turkey
2. Study Reducing Fluid Temperature of CVT Gear Under Different Load Conditions Using Different Additives
5th International Conference on Pure Sciences and Agricultural Sciences
2023
Antalya Turkey
3. The Influence of Certain Mechanical and Physical Drying Factors at The Manufactories of Shelling and Corn on Selected Properties
4th International Conference on pure Science and Agricultural Science (ICPAS) which will take place on May 26-29, 2021 in Antalya, Turkey
2021
Antalya, Turkey.

4. No-tillage Seeders for Crops and Their Development: A review paper
4th International Conference on pure Science and Agricultural Science (ICPAS) which will take place on May 26-29, 2021 in Antalya, Turkey
2021
Antalya, Turkey.

5. Effect of planting distances and varieties on the yield of three cucumber hybrids (Cucumis sativus L.) using drip irrigation under protected cultivation conditionsمشكلة
IOP Conf. Ser.: Earth Environ. Sci. 735 012072DOI 10.1088/1755-1315/735/1/012072
2021
Al-Qadisiyah, Iraq

6. The Impact of Forward Tractor Speed and Depth of Ploughing in Some Soil Physical Properties
IOP Conf. Ser.: Earth Environ. Sci. 761 012002
2021
Erbil، Iraq

7. The Effect of Drip Irrigation, Plant Spacing and Chemical Fertilizers on Some Characteristics of Eggplant Solanum melongena L. Grown inside A greenhouse
IOP Conf. Series: Earth and Environmental Science 553 (2020) 012005
2020
Al-Qadisiyah, Iraq

8. The Effects of Different Spreader Rates and Fertilizer Types on Grain Yields of Barley (Hordeum vulgare L.)
The 4rd International Conference on Agricultural and Food Engineering (CAFEi2018), 7-9 November, 2018, Kuala Lumpur, Malaysia.
2018
Kuala Lumpur, Malaysia

9. Effects of cutting speeds, moisture contents and sweet potato varieties on tractor fuel consumption
The 3rd International Conference on Agricultural and Food Engineering (CAFEi2016), 23-25 August, 2016, Kuala Lumpur, Malaysia.
2016
Kuala Lumpur, Malaysia

10. Pulverization of Sweet Potato Vine
4th World Virtual Conference on Applied Sciences and Engineering Applications (4WVCASEA2015). November 28-30, 2015, Kuala Lumpur ,Malaysia.
2015
Kuala Lumpur,Malaysia

11. Effects of Designed Mower Blades at Different Blade Cutting Angles and Different Feeding Angles on Vine Pulverization and Power Consumption
7th International Conference on Sustainable agriculture for food energy and industry in regional and global context (ICSAFEI 2015). 25 - 27 August 2015, Serdang, Selangor, Malaysia
2015
Serdang, Selangor, Malaysia

12. Effects of Rotary Mower Blade Cutting Angles on the Pulverization of Sweet Potato Vine
2nd International Conference on Agricultural and Food Engineering, CAFEi2014. 1-3 December 2014, Kuala Lumpur, Malaysia
2014
Kuala Lumpur, Malaysia

13. Effects of Mower Speeds on Tractor Fuel Consumption and Pulverized Percentage of Sweet potato Vine.
3rd International Conference on Advanced Material Engineering & Technology 2014 (ICAMET 2014). 4th - 5th December 2014, Duxton Hotel Saigon, Ho Chi Minh City, Vietnam.
2014
Vietnam

14. Effects of Knife Shapes and Cutting Speeds of a Mower on the Percentage Pulverization of Sweet Potato Vine.
International Conference on Information Technology for Manufacturing Systems (ITMS 2013). August 28-29, 2013, Auckland, New Zealand. http://www.itms-conf.net/.
2013
Auckland, New Zealand

15. Pulverization of Sweet Potato Vine at Different Mower Speeds.
2nd International Conference on Mechanical Engineering Research (ICMER2013). UMP. 1-3 July 2013. Kuantan, Pahang, Malaysia.
2013
Kuantan, Pahang, Malaysia

16. Effects of Feeding Angles and Cutting Speeds of a Mower Knife with Serrated Edges on the Pulverization of Sweet Potato Vines.
International Conference on Advanced Material Engineering & Technology (ICAMET 2012). 28- 30th November 2012. Penang Island, Penang, Malaysia.
2012
Penang Island, Penang, Malaysia

17. Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing).
The International Conference on Agricultural, Food and Biological Engineering (ICAFBE 2012) Part I, May 11-13, 2012, Guangzhou, China.
2012
Guangzhou,China

18. Effects of Knife Angles and Cutting Speeds on Pulverization of Sweet Potato Vines.
USM-ATU International Conference from 17-18 Nov.2012, USM, Penang, Malaysia
2012
USM, Penang, Malaysia

19. Effects of Types of Slashers and Cutting Speeds on the Quality of Grass Chopping (Pulverizing) at High Moisture Content.
International Conference on Mechanical Engineering and Advanced Technology from 10-12 Oct. 2012. Abbasi International Hotel, Isfahan, Iran.
2012
Isfahan, Iran.

20. Pulverization of Sweet Potato Vines Using Different Blade Angles and Mower Speeds
International Conference on Agricultural and Food Engineering for Life (Cafei2012), from 26-28 Nov. 2012. IOI Palm Garden Hotel, Putrajaya, Malaysia.
2012
Putrajaya,Malaysia

21. Effects of Cutting Speeds and Knife Angles of a Mover Knife With Serrated Edges on the Pulverization of Sweet Potato Vines.
Proceedings of the UMT, 11th International Annual Symposium on Sustainability Science and Management, 9-11th July, 2012, Terengganu
2012
Malaysia

22. Effects of Types of Slashers on Grass Chopping (Pulverizing).
The Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 July, 2012, Meritus Pelangi Beach Resort & Spa., Langkawi, Kedah, Putrajaya, Malaysia.
2012
Malaysia

23. Effects of Different Cutting Speeds on Grass Pulverizing.
International Conference on Green Technology and Ecosystems for Global Sustainable Development (IGCTEC2012), 28-30 May, 2012, University of Tuzla, Bosnia and Herzegovina.
2012
Bosnia and Herzegovina.

24. Study on the Effects of Planting Distance on Yield of Beans (Vicia Faba L.) Under Drip Irrigation System.
The Seventh International Postharvest Symposium (IPS 2012). Putra World Trade Centre (PWTC) in Kuala Lumpur, Malaysia, 25th – 29th June 2012 .Malaysia. Poster Paper.
2012
Malaysia

25. Effects of Planting Distance on Yield of Beans Under Drip Irrigation System.
National Conference on Agricultural and Food Mechanization (NCAFM 2012), 10-12 January, Pullman Hotel, Kuching, Sarawak. Poster Paper.
2012
Malaysia

26. Design and Development of an Integrated Slasher (Pulverizer) for Sweet Potato Harvester: A Review.
1st International Conference in Mechanical Engineering Research (ICMER 2011), Kuantan, Pahang, Malaysia.
2011
Kuantan, Pahang, Malaysia

27. تأثير مستوى التغذية والمحتوى الرطوبي على نوعية الذرة الصفراء المفرطة اليا.
المؤتمر العلمي الخامس/ وزارة الزراعة العراقية. مجلة الزراعة العراقية البحثية.
2003
العراق

28. تأثير مستويات التغذية و سرعة وحدة الفرط ورطوبة المحصول على نسبة التكسر في الحبوب ونسبة المواد الدقيقة في معامل الذرة الصفراء
المؤتمر العلمي الخامس/ وزارة الزراعة العراقية. مجلة الزراعة العراقية البحثية.
2003
العراق

براءات الاختراع

A Tuber Vegetation Harvester./ /Patent No. P12013701939. Malaysia

الجوائز والتكريمات

أكثر من 400 ورشة وندوة